High Strength And Good Corrosion Resistant Nitronic 50 Alloy Tube / Pipe
1.Description:
NITRONIC 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature. In addition, Armco NITRONIC 50 Stainless has very good mechanical properties at both elevated and sub-zero temperatures. And, unlike many austenitic stainless steels, NITRONIC 50 does not become magnetic when cold worked.
2.Applications:
Superior corrosion resistance
Almost double the yield strength
Exceptionally low magnetic permeability
Outstanding cryogenic properties
Outstanding corrosion resistance gives Armco's NITRONIC 50 Stainless Steel the leading edge for applications where Types 316. 316L, 317 and 317L are only marginal. It's an effective alloy for the petroleum, petrochemical, chemical, fertilizer, nuclear fuel recycling, pulp and paper, textile, food processing and marine industries.
Components using the combination of excellent corrosion resistance and high strength currently include pumps, valves and fittings, fasteners, cables, chains, screens and wire cloth, marine hardware, boat and pump shafting, heat exchanger parts, springs and photographic equipment.
Fastener - High strength, and higher strength fasteners can improve the durability of you equipment
Marine hardware - Mastings, tie downs
Marine and Pump shafts - better corrosion than types 304 and 316, with double the yield strength.
Valves and fittings - better corrosion than types 304 and 316, with double the yield strength.
Downhole rigging - better corrosion than types 304, 316 and 17-4, with double the yield strength in annealed condition.
Reduced cross sections - better corrosion than types 304, 316 and 17-4
3.Annealing Temperature:
NITRONIC 50 Stainless Steel can be supplied annealed at 1950 F to 2050 F (1066 C to 1121 C). For most applications, the 1950 F (1066 C) condition should be selected, as it provides a higher level of mechanical properties along with excellent corrosion resistance. When as-welded material is to be used in strongly corrosive media, the 2050 F (1121 C) condition should be specified in order to minimize the possibility of intergranular attack.
Product Tags:
|
|
Hot Rolled Nitronic 50 Material , Xm 19 Material Alloy Tube / Pipe Images
|
